Page 15 of 18

 

 

Software

GEOLOGGER-3:   Cyratron’s Proprietary Mud logging Software

Geologger-3 provides the user with complete online information of the Drilling and Mud data in both Numerical and Graphical forms. Both online trends as well as Historical trends of data can be easily viewed on any of the three computers.

Any combination of data, either in the numerical or graphical formats can be selected by the user.

Geologger-3 provides storage, retrieval and backup of data.

Historical retrieval of data is possible against any combination of parameters.

Data  

 

 

The Mud Data Screen

 

 

 

 

 

 

 

The Drill Data Screen

 

 

 

 

 

 

A Mimic of the Tank Volumes

 

 

 

 

 

Graphical Trend of the Mud Data

 

 

 

 

 

 

Graphical Trend of the Drill Data

 

 

 

 

 

 

Graphical Trend of Drill Data

 

 

 

 

 

 

Mimic of Mud Tanks

 

                              

Gas Scan Software: Gas Scan software provides for the calibration and the storage, display and retrieval of the Total Gas Data and the Chromatographic Data. Chromatographic analyses from C1 to C5 including both isomers of Butane are analyzed.

Total Hydrocarbon analyzer provides complete analysis of combustible gas in both Units and percentage.

 

Graphical Trend of Total and Chroma Data plotted with Lagged Depth and ROP.

                 

GEOLOGGER – 3 ONLINE SOFTWARE

The GELOGGER has three modules

1)    Drill DATA System

2)    Mud Data System

3)    Gas Data System

 

The Drill Data System has three Modes

a)    The Drill Mode

b)    The Trip Mode

c)    The Kick Control Mode

 

Each mode can be activated without affecting the performance of the other modes and either one or all three can be displayed simultaneously.

 

The Drill Data System – Drill Mode

1.     Drilling RATE – ROP and Drilled Depth   

2.     Instantaneous ROP, Average ROP, Maximum ROP 

3.     Lag Time and Lagged Depth

     3. Stand pipe Pressure - SPP

4.     Casing Pipe Pressure – CPP

5.     Torque (Rotary and Top Drive) Average, Maximum, Instantaneous

6.     RPM    (Rotary and Top Drive)

7.     Hook Load/WOB

8.     SPM (Three Pumps)

9.     Stand number

10.            Hydraulics

11.            Flow Rate In/ Out

12.            Corrected Drilling E’xponent

13.            Normalized Drilling Exponent

14.            Estimated Pore Pressure Gradient 

15.            Estimated  Over Burden Gradient

16.            Estimated Fracture Gradient

17.            Estimated Tooth wear

18.            Estimated Drilling Porosity

19.            Estimated ECD

20.            Estimated static and dynamic over balance

21.            Bit hours

 

 

The Mud Data System

1.     Mud specific gravity IN/OUT.

2.     Mud temperature IN/OUT.

3.     Mud conductivity IN/OUT.

4.     Mud Flow rate     IN/OUT.

5.     Active Mud Volume totalizer (10 pits).

6.     Trip tank monitor.

7.     Individual Pit Volume 

8.     Reserve Volume

9.     Slug/ Pill Volume 

 

 

The Gas Data System

1.     Chromatographic Analysis from C1 to C5 with both isomers of C4 and C5 in 45 seconds for the full cycle.

2.     Total Hydrocarbons from 10 ppm

3.     H2S Detection Multiple points with presettable alarms 

4.     CO2 Analyses with pre set alarms

 

 

The Basic Parameters that can be Input into the system

1.Litholgy

2.Formation Density

3. Annular and String Volumes

5.                 Bit Specifications

6.                 Mud Properties

7.                 MWD/LWD/PWD down hole data

8.                 Rig Costs  

 

Real Time Trip Monitor – Trip Mode

1.     Real time Bit Position during tripping

2.     Stands Tripped / to Go

3.     Hook Load per Stand, average, maximum, expected, difference.

4.     Trip Tank Volume

5.     Estimated Trip Completion time

6.     Average and Maximum tripping speed for Trips Stands /hrs

7.     Swab /Surge Pressure, Maximum for hole and at bit.

8.     Cross Plot Expected VS Actual Hookload

9.       Cross Plot Expected Vs actual Pit Volume.

 

 

Kick Control System – Kick Control Mode

1.     Drilling Depth

2.     Choke Line Pressure

3.     Shut In Stand Pipe Pressure (SIDP)

4.     Shut In Casing Pressure (SICP)

5.     Total Pit Volume

6.     Active Pit Volume

7.     Active Pit Volume

8.     Trip Tank Volume

9.     Mud Density In/ Out

10.            Mud Flow In/Out

11.            Pit Gain

12.            Surface to Bottom Volume and Strokes

13.            Total Volume Displaced 

14.            Bottom to Surface Volume and Strokes

15.            Depth of Kill Mud

16.            Depth of Kick Fluid (Influx)

17.            Plot of Casing Pressure vs. Standpipe Pressure 

18.            Total Gas

19.            Maximum Gas observed.

 

    Features of the Software

§         Comprehensive software for on-line data acquisition, calibration, diagnostics, storage and retrieval of data from database.

§         Hardware and Software diagnostics.

§         Operating System Windows 2003

§         Anti Virus Program (Norton Anti- Virus)

§         MS Office –2003

§         Data retrieval program for processing reprint, plotting of stored data for charts, graphs etc., to any combination of Mud, Drilling Gas calculated parameters.

§         The unit of measurement is in the CGS system.

§         All Programs for Online run under Windows 2003.

§         All programs for offline run on Windows XP and Office XP for documentation.

§         On Line Graphical printing on 4 inkjet printers.

§         Alphanumerical printing in Time or Depth on two Dot matrix printers 132 col. NLQ.

§         Offline printing of Master Log, D’exponent, Sigma Log & Casing History.

§         Offline data computer has Windows XP and Office XP software.

 

L0gs and Reports

·         Formation Evaluation Logs

·         Gas Show Logs

·         Temperature Data Logs

·         Pressure Evaluation and Analysis Logs

·         Drilling Data Log

·         Mud Data Log

·         Alarm History Log

·         Drilling Time Breakup

·         Wire Line Pressure Log.